Cooling Tower Water Treatment Chemicals:
We export Cooling Tower Water Treatment Chemicals, which remove the scaling & corrosion products from cooling water circuits, boilers & heat changers. As a liquid formulation it removes callosity & low massed silica scales that can also be abstracted offline by transmitting its thinned chemical solution. It is a balanced chemical compound of hydrochloric acid, corrosion inhibitors, and dispersant wetting agents.
Purpose of Cooling Tower Chemicals :
The firsthand purpose of chemical cleansing of Cooling Towers / Boilers is to prevent tube collapse & amend unit availability. In low pressure cooling towers, the tube failures are commonly the consequences of creep, which happens when internal deposits make an extravagant metal temperature. A small amount of deposit appoints troubles in high pressure boilers, hydrogen damage, caustic corrosion, which occur in the presence of deposits. Deposits arising both from fabrication & action should be considered as latent problems.
All the pressure components of steam generator may be susceptible to heat treatment during:
- Forming operations
- Tension relief
Oxidation occurs after carbon low alloy steels are opened to high temperatures in the existence of air. The oxide emerged after this process is known as mill scale. Mill scale is usually very compressed, except the areas near bends and welds. Mill scale is uniform at the start but its breakables upon cooling may bring flaking. The non-uniform surface as the result is inapplicable from the stand of corrosion condition. During the time of action mill scale is speedily worn from the steam making surfaces. It may also subsequently be redeposited in faultfinding areas. Acid cleaning before the operation has the benefits:
- Discharge of mill scale
- Elimination of atmospheric rust.
When the product is placed into service, many solid essentials may enter the units with the feed water & some part of the insoluble can be expected on surfaces. If not abstracted these deposits assembled can decrease the amount of these materials. Nevertheless, absolute freedom from accumulation is not manageable in a high pressure scheme. The need for infrequent chemical cleaning during the existence of the instrumentation has become a accepted fact and a routine pattern. A service cleaning in every 3 to 4 months is suggested. The frequency should be enhanced if the unit has a long history of service.
COOLING TOWER CLEANING CHEMICAL is risk-free & non-caustic for descaling that resolves hardness scales quickly & completely.
SAFE FOR METALS.
BOILER CLEANING CHEMICAL incorporates a synthetic polymeric corrosion substance having a protective film and preventing acid attack.
DETERGENT ACTION .
COOLING TOWER CLEANING CHEMICAL includes a wetting agent, which make alterations in the oil grease of deposits. The detergent act of Aquablend-DS changes the following:
COOLING TOWER CHEMICAL should be treated in 5-10 % solution in water . Normally the amount of scale needed counts upon the operational condition and quantity of scales. Our company will give you the benefits by:
- Technical aid
- Equipment setup
- Optimal dosage according to operating premises and system.
STORAGE & HANDLING
COOLING TOWER CHEMICAL has following storage conditions:
- Should be packed in an air tight instrumentation.
- Store away from sun light.
- Keep at cool & dry place.
- Wash with water in case of physical contact with this.
- Do not consume in any way.
COOLING TOWER CHEMICAL is accessible in 20 Kg & 35 Kg. Compact in HDPE CARBOY.
Whether your cooling tower is large or small, it has requirements of chemical treatment that accurately and dependably control corrosion, deposits and scale. Chemicals dispensed include:
- Corrosion activators
- Scale substances
- Biological control agents