|Home||» Products||» RO Membrane Cleaning Chemical||» Membrane Cleaning Chemical|
Unprocessed RO systems cause multiple environmental issues such as inorganic, colloidal & bio fouling, which in turn causes decreased permeate recovery, which in turn leads to premature membrane failure. Elements which act as excellent thresholds which could accelerate the solubility limit(while also acting as iron sequesters) include carbonates, Sulphates, Silicates etc.
AQUABLEND - 902 ( SILICA ANTISCLANT FOR R.O. )
The Silica Antisclant is a special formulation which treats RO water which has greater levels of silica & metal oxides. Not only does this formulae control silica scales & fouling, but it also enhances thee performance of the device.
Effective and efficient scale control.
Along with reducing scaling(caused due to metal oxides), such items are extremely effective in removing residual coagulants. Known for their decreased cleansing frequency, these are steady of different pH ranges and temperatures.
Eliminate conventional treatment.
Silica Antisclant replaces conventional treatment of SHMP for RO’s, thus minimizing the cons of utilizing the same, to zero.
Controls calcium / strontium / barium scales with concentration ranging upto 280 ppm, efficiently,
Control deposition of suspended solids.
Acting as a non corrosive liquid miscible with water, the formulation aids in keeping the membrane fresh, by removing slit & colloidal particles.
Setting the dosage to 1-10 ppmc(neat) depending on operation conditions, one should ensure that this procedure is carried out before assembling the cartridge filter. Our technical support would guide you through the entire process.
Storage & Handling
Securing them in air tight containers, such goods should be stored in a cool and dry area. The jar should be kept away from heat. In case of contact, wash vigorously with water. DO NOT SWALLOW!
Silica Antisclant For RO is acquirable in 20 Kg HDPE drums.
AQUABLEND - 921 (Membrane Chemical)
Working on the concept of reverse osmosis, this Cleaning formulae removes carbonates, metal oxide & sulfate scales of barium etc quite effectively.
Cleaning Chemical should be dosed in 0.5 - 3 % solution in D.M. water.Numatik Engineers Pvt Ltd will provide technical assistance to setup optimum dosage according to operating conditions and system.
Storage & Handling
Along with keeping the membrane chemical is stored away from heat, while keeping it at a cool and dry place. In case of contact, cleanse thoroughly with water. DO NOT SWALLOW.
This Cleaning Chemical is accessible in 20 Kg HDPE drum.