Thermic Fluid Cleaning Chemical :
Thermic Fluid is the heating media which transfer the heat in close loop cycle.
It is available in two forms
Mineral oil can withstand maximum temperature up to 280C. Synthetic oil can withstand maximum temperature up to 310C.
Continuous use of thermic fluid systems results in to deteriorating of Thermic fluid.
The main causes for deterioration are oxidation & cracking.
CHEMICALS USE FOR THERMIC FLUID DECARBONIZING ARE:
COMPARSION BETWEEN
FUELINE R (OFFLINE PRODUCT)
AND
THERMIN-DC (ONLINE PRODUCT)
Sr. | Parameter | Fueline-R | Thermin-DC | |
| ||||
INGRADIENTS MFG. DETAILS. | ||||
| ||||
Base | Synthetic Lude Oil | Synthetic Thermic Fluid | ||
Strong carbon dispersant. | Organic oil based | Organic oil based | ||
Viscosity reducer. | Higher mol. Wt. | Higher mol. Wt. | ||
Penitratant | Synthetic | Synthetic | ||
Ionic emulsifier | Organic 10m | Organic 10m | ||
Corr.inhibitor | Built in base | Built in base | ||
PROCESS BLENDING | COLD | CLOD | ||
| ||||
PHYSICAL & CHEMICAL PROPERTIES. | ||||
| ||||
pH | Acidic | Acidic | ||
Specific Gravity | 0.75- 0.85 | 0.75 -0.9 | ||
Viscosity | 15-20cst | 18-30cst | ||
Flash Point open cup | 140-160 | 190-200C | ||
Working temp.-close lop | 120C | 310C | ||
| ||||
EFFECT ON THERMIC FLUID. | ||||
| ||||
Application | Offline | Online | ||
Thermic fluid after treatment | Complete drain | Reused as normal | ||
pH | Increases slightly | Increases slightly | ||
Specific Gravity | Decreases nominally | Decreases nominally | ||
Viscosity | Decreases drastically | Decreases drastically | ||
Flash Point | Remains same | Remains same | ||
Acid Valve | Decreases slightly | Decreases slightly | ||
Autoignitation Temperature | Remains same | Remains same | ||
Pour Point | Decreases | Decreases | ||
| ||||
CASES OF WORKING. | ||||
| ||||
|
| FUELINE-R | THERMIN-DC | |
| Working Conditions | Flash point below 150C | Flash point below 150C | Flash point above 150C |
| Type of action | Offline work | Online work | Online work |
| Working temperature | Less than 100C | Up to 300C | Up to 300C |
| Dose | 7-10% | 3-5% | 3-5% |
| Down time | 24-36hrs. | Nil | Nil |
| Addition when | Immediate | 4 day prior to drain | Immediate |
THERMIN DC
ONLINE THERMIC FLUID DECARBONIZING CHEMICAL
Thermin DC is a powerful formation which is a combination of strong carbon dispersant, emulsifier & corrosion inhibitor.
This formulation is used effectively for online decarbonization of entire thermic fluid system.
FUELINE R
PRODUCT DETAILS ADVANTAE OF USING FUELINE R
Fueline is powerful formulation which is combination of strong carbon dispersant, emulsifier & corrosion inhibitor.
This formulation is used effectively for decarbonization & descaling of entire thermic fluid system. This is an ideal solution
to be applied before replacement of thermic fluid from any system.