Back to top
Send SMS Send Inquiry

Furnace Oil Additives

Furnace Oil Additives

Product Details:

  • Supply Ability : 1 Kilograms Per Week
2000.00 - 6000.00 INR

Price And Quantity

  • 2000.00 - 6000.00 INR
  • 20 Kilograms

Trade Information

  • 1 Kilograms Per Week
  • 1 Week

Product Description

Furnace Oil Additives

The Fuel Oil Conditioner

The residue fuel oils namely furnace oil,LSHS,LDO produced by our refineries primarily contain heavy residue namely asphaltenes ,poly aromatics and waxes blended with low viscosity hydrocarbons. These oils are high in conardson carbon which creates problem during combustion of the oil resulting into soot formation. Moreover fuel suffers from stratification that is sludge formation during storage in the tanks.

M/s Numatik Engineers Pvt Ltd . have developed a fuel conditioner  for different industrial fuels i.e. F.O , LSHS, LDO, HSD etc. Which helps you to keep your system clean , better efficiency of boiler , less corrosion etc.

  • Furnace Oil Additives   is a multipurpose fuel conditioner formulation designed keeping in mind typical fuel oil related problems and over all improvement in Fuel economy.
  • Furnace Oil Additives contains a,  sludge dispersant and corrosion inhibitor which keeps tank, pipelines strainers & nozzles clean.
  • Furnace Oil Additives also contains emulsifier & combustion catalyst which helps to improve the overall combustion efficiency by reduction in soot formation as well as stack Temperature.
  • Furnace Oil Additives is to be applied as preventive maintenance for oil fired systems. Regular use will keep the system Clean & trouble-free


Keeps Fuel System Clean                  

Furnace Oil Additives Contains a polymer dispersant that disperses sludge in line particles .the detergent action of the polymer keeps Oil heaters, strainers and burner nozzles clean. This results in efficient use of the equipment.

Better Fuel Atomization  

The surfactant in Furnace Oil Additives atomizes fuel ,improving combustion this allows operation at lesser excess air , improving combustion efficiency

Catalytic Combustion   

Furnace Oil Additives  reduces ignition delay of asphaltic components in fuel & helps to burn it completely reducing soot & clinker formation

Reduced Deposits  

Furnace Oil Additives helps to reduce deposits on the oil heater ,boiler heat exchanger surfaces promoting better heat transfer ,reducing metal corrosion and maintenance cost

Dosage & Application

Furnace Oil Additives can be added to the storage tank,just before unloading  fresh fuel tanker .The agitation caused by incoming oil will mix FUEL ADDITIVES uniformly with oil .Numatik Engineers Pvt Ltd  will assist you in designing & establishing a treatment program to meet your specific needs and operating conditions.

Handling & Storage

 Furnace Oil Additives contains a solvent & organo-metallic compounds. Avoid contact with skin. In case of contact wash with soap & fresh water. Do not swollow. Keep container closed & away from direct heat.

  Furnace Oil Additives is available in 20  litre carboys.
Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Fuel Additives' category

6, Bobby Pathak Avenue, Near Corporation Bank, Opp. Rotary Garden, C.S. Complex, Dahisar (E), Mumbai - 400068, Maharashtra, India
Phone :08045802098
Fax :91-22-28480100
Mr. Manu C. Patel (Director)
Mobile :08045802098
Trust Stamp

Send SMS Send Inquiry